Kyocera KM-6030 Service Manual page 148

Maintenance
item No.
Relay board maintenance
U935
Description
Sets the machine status temporarily when call for service (C0060 and C0330) occurs. However, after the set-
ting, call for service (C0060 and C0330) occurs again when progress of period.
Method
Press the start key. The screen for selecting an item is displayed.
Setting
1. Select the item to be set. The selected item is displayed in reverse.
Display
MODE 0
MODE 1
MODE 2
Initial setting: MODE 0
2. Press the start key. The setting is set, and the screen for selecting a maintenance item No. is displayed.
Completion
To exit this maintenance item without changing the current setting, press the stop/clear key.
The screen for selecting a maintenance item No. is displayed.
Supplement
After removing the cause of the problem, be sure to change the setting in OFF.
Setting the type of cooling fan
U954
Description
Sets the new or old type of cooling fan.
Purpose
To change the setting according to the type of the cooling fan.
Method
Press the start key. The screen for selecting an item is displayed.
Setting
1. Select MODE1 or MODE2. The selected item is displayed in reverse.
Display
MODE2
MODE1
Initial setting: MODE2*
*1: For the machine produced in July, 2005 and after.
*2: 120 V specifications only (for the machine produced in before June, 2005).
2. Press the start key. The setting is set, and the screen for selecting a maintenance item No. is displayed.
Completion
To exit this maintenance item without changing the current setting, press the stop/clear key. The screen for
selecting a maintenance item No. is displayed.
Description
Setting mode: OFF
Setting mode: 60 cpm machine status
Setting mode: 80 cpm machine status
Description
New type of cooling fan
Old type of cooling fan
/MODE1*
1 2
Description
2FB/2FC-3
1-4-73