Kyocera KM-6030 Service Manual page 154

Selecting copy paper for zooming
Automatically sets the copy paper according to the
selected zooming level or according to the size of the
original document.
1. Select [APS Setting] using the cursor up/down keys
and press [Change #].
2. Select [Most Suit Size] or [Same as Orig. Size].
Selecting paper types for automatic paper selection
Sets the type of paper when the copier automatically
selects the copy paper according to the size of the orig-
inal.
1. Select [Select paper type (APS)] using the cursor
up/down keys and press [Change #].
2. Press [On] and select the paper to type for auto-
matic paper selection.
Plain/Transparency/Rough/Vellum/Labels/Recy-
cled/Preprinted/Bond/Cardstock/Color (Colour)/
Prepunched/Letterhead/Thick paper/Envelope/High
Quality/Custom 1-8
Selecting default cassette
Selects the cassette (1 to 5) to be used automatically.
The MP tray is not available for the default cassette.
[5th paper] is available when the copier is equipped
with an optional side feeder.
1. Select [Default drawer (Default cassette)] using the
cursor up/down keys and press [Change #].
2. Select the cassette.
Specifying cassette for cover paper
Sets the cassette which is automatically selected to
feed cover paper during the cover or booklet mode is
used.
[5th paper] is available when the copier is equipped
with an optional side feeder.
1. Select [Drawer for cover paper] ([Cassette for cover
paper]) using the cursor up/down keys and press
[Change #].
2. Select the cassette.
Automatic zoom
When the sizes of the original document and the copy
paper do not match, this determines whether the origi-
nal is automatically zoomed to fit onto the copy paper.
1. Select [Auto % Priority Setting] using the cursor up/
down keys and press [Change #].
2. Select [Off] or [On].
Adjusting auto exposure
Adjusting the median exposure for auto exposure by
biasing the reference exposure.
1. Select [Adjust auto exposure] using the cursor up/
down keys and press [Change #].
2. Press [Lighter] or [Darker] to adjust the exposure.
Setting range: -3 to +3
Adjusting automatic exposure for scanning text doc-
uments
Adjusts the scanning exposure when the copier is
installed with the option scanner.
1. Select [Adjust auto exposure (OCR)] using the cur-
sor up/down keys and press [Change #].
2. Press [Lighter] or [Darker] to adjust the exposure.
Setting range: -3 to +3
Adjusting manual exposure: Text+Photo mode
Adjusts the median value for the manual exposure
range.
1. Select [Adj. Manual expo.(Mixed)] using the cursor
up/down keys and press [Change #].
2. Press [Lighter] or [Darker] to adjust the exposure.
Setting range: -3 to +3
Adjusting manual exposure: Text mode
Adjusts the median value for the manual exposure
range.
1. Select [Adj. Manual expo.(Text)] using the cursor
up/down keys and press [Change #].
2. Press [Lighter] or [Darker] to adjust the exposure.
Setting range: -3 to +3
Adjusting manual exposure: Photo mode
Adjusts the median value for the manual exposure
range.
1. Select [Adj. Manual expo.(Photo)] using the cursor
up/down keys and press [Change #].
2. Press [Lighter] or [Darker] to adjust the exposure.
Setting range: -3 to +3
Selecting default zoom
Sets whether to use automatic zoom.
1. Select [Reduce/Enlarge] using the cursor up/down
keys and press [Change #].
2. Select [Auto %] or [100%].
Selecting sorting and offsetting output
Sets sorting and/or offsetting output as the default out-
put.
1. Select [Sort/Offset (Sort/Group)] using the cursor
up/down keys and press [Change #].
2. Select Sort and Offset [On] or [Off].
Selecting auto rotation
Sets whether the automatic rotation by default.
1. Select [Auto Rotation] using the cursor up/down
keys and press [Change #].
2. Select [No Rotate] or [Rotate].
Default margin
Sets the default margins for copying.
1. Select [Default margin width] using the cursor up/
down keys and press [Change #].
2. Specify the default margin for each side using cur-
sor up/down or left/right keys.
Setting range
Inch specifications: 0 to 3/4" (in 1/8" increments)
Metric specifications: 0 to 18 mm (in 1-mm incre-
ments)
2FB/2FC
1-4-79