Kyocera KM-6030 Service Manual page 131

2FB/2FC-2.0
Maintenance
item No.
Switching copy operation at toner empty detection
U258
Description
Selects if continuous copying is enabled after toner empty is detected, and sets the number of copies that can
be made after the detection.
Purpose
To change the copying operation after detection of toner empty status.
Method
Press the start key. The screen for selecting an item is displayed.
Setting
1. Select single or continuous copying. The selected item is displayed in reverse.
Display
SINGLE MODE
CONTINUE MODE
Initial setting: SINGLE
2. Set the number of copies that can be made using the * or # keys.
Description
Number of copies after toner empty detection
The setting can be changed by 5 copies per step.
When set to 0, the number of copies is not limited regardless of the setting for single or continuous copy-
ing.
3. Press the start key. The setting is set, and the screen for selecting a maintenance item No. is displayed.
Completion
Press the stop/clear key at the screen for selecting an item.
The screen for selecting a maintenance item No. is displayed.
Selecting the timing for copy counting
U260
Description
Changes the copy count timing for the total counter and other counters.
Purpose
To be set according to user (copy service provider) request.
If a paper jam occurs frequently in the optional document finisher when the number of copies is counted at the
time of paper ejection, copies are provided without copy counts. The copy service provider cannot charge for
such copying. To prevent this, the copy timing should be made earlier.
If a paper jam occurs frequently in the paper conveying or fuser sections when the number of copies is
counted before the paper reaches those sections, copying is charged without a copy being made.
To prevent this, the copy timing should be made later.
Method
Press the start key. The screen for selecting an item is displayed.
Setting
1. Select the copy count timing. The selected item is displayed in reverse.
Display
FEED
EJECT
Initial setting: EJECT
2. Press the start key. The setting is set, and the screen for selecting a maintenance item No. is displayed.
Completion
To exit this maintenance item without changing the current setting, press the stop/clear key.
The screen for selecting a maintenance item No. is displayed.
1-4-56
Description
Description
Enables only single copying.
Enables single and continuous copying.
Description
When secondary paper feed starts
When the paper is ejected
Setting range Default setting
0 to 200 200