Kyocera KM-6030 Service Manual page 136

Maintenance
item No.
Setting the drum heater mode
U335
Description
Sets the drum heater to ON or OFF. If the image deletion occurs in an environment of a temperature and
humidity widely varies, change the setting to ON2.
Purpose
Basically, the setting need not be changed.
Method
Press the start key. The screen for selecting an item is displayed.
Setting the drum heater
1. Select ON1, ON2 or OFF.
Display
ON1
ON2
OFF
Initial setting: ON1
2. Press the start key. The setting is set, and the screen for selecting a maintenance item is displayed.
Checking the drum heater
1. Select DRUM HEATER CHECK.
The selected item blinks and the check of a drum heater is started.
When a drum heater is normal, 1 is displayed, and in the case of abnormalities, 0 is displayed.
Completion
Press the stop/clear key at the screen for selecting an item. The screen for selecting a maintenance item No.
is displayed.
Setting the drum heater ON/OFF
U339
Description
Sets the drum heater and drawer heater to ON or OFF for the sleep mode.
Purpose
To change the setting when dew condensation on the drum is heavy.
Method
1. Press the start key. The screen for selecting an item is displayed.
2. Select ON or OFF.
Display
ON
OFF
Initial setting: OFF
When setting is turned to ON, the setting of U327 is turned as ON and U335 is turned as ON1 or ON2.
3. Press the start key. The setting is set, and the screen for selecting a maintenance item No. is displayed.
Completion
Press the stop/clear key. The screen for selecting a maintenance item No. is displayed.
Specific paper feed location setting for printing function
U341
Description
Sets a paper feed location specified for printer output (only if a printer kit is installed).
Purpose
To use a paper feed location only for printer output.
Method
1. Press the start key. The screen for selecting an item is displayed.
2. Select the paper feed location for the printer. The selected item is displayed in reverse.
Two or more cassette can be selected.
Selection is canceled when the selected item is pressed again.
3. Press the start key. The setting is set.
Completion
To exit this maintenance item without changing the current setting, press the stop/clear key.
The screen for selecting a maintenance item No. is displayed.
Description
Controls the drum heater to be turned ON/OFF by temperature and humidity.
Always ON
Always OFF
Description
Power source is supplied to the drum heater PWB in sleep mode
Power source is not supplied to the drum heater PWB in sleep mode
Description
2FB/2FC-3
1-4-61