Kyocera KM-6030 Service Manual page 117

2FB/2FC
Maintenance
item No.
Checking the operation panel keys
U207
Description
Checks operation of the operation panel keys.
Purpose
To check operation of all the keys and LEDs on the operation panel.
Method
1. Press the start key. The screen for executing is displayed.
2. COUNT1 is displayed and the leftmost LED on the operation panel lights.
3. As the keys lined up in the same line as the lit indicator are pressed in the order from the top to the bot-
tom, the figure shown on the touch panel increases in increments of 1.
When all the keys in that line are pressed and if there are any LEDs corresponding to the keys in the line
on the immediate right, the top LED in that line will light.
4. When all the keys on the operation panel have been pressed, all the LEDs light for up to 10 seconds.
5. When the LEDs go off, press the start key. All the LEDs light for 10 seconds again.
Completion
Press the stop/clear key. The screen for selecting a maintenance item No. is displayed.
Setting the paper size for the feeders
U208
Description
Sets the sizes of paper placed in cassette1, cassette 2 and optional side feeder respectively.
Purpose
To set the size when the size of paper placed in cassette 1, cassette 2 or optional side feeder is changed.
Method
Press the start key. The screen for selecting an item is displayed.
Setting
1. Press the start key. The screen for executing is displayed.
2. Select paper size (11 x 8.5, A4, or B5) as each cassette 1-2 and optional side feeder. The selected item
is displayed in reverse.
Initial setting: A4 (220-240 V specifications)/11 x 8.5 (120 V specifications)
3. Press the start key. The setting is set and the screen for selecting a maintenance item No. is displayed.
Completion
To exit this maintenance item without changing the current setting, press the stop/clear key. The screen for
selecting a maintenance item No. is displayed.
Setting the feeder lift operation
U212
Description
Sets the operation of the side feeder lift motor for when paper in the optional side feeder is exhausted.
Purpose
To be set according to the paper loading method.
Method
Press the start key. The screen for selecting an item is displayed.
Setting
1. Select the method to load paper.
Display
SIDE FEED
UPPER FEED
Initial setting: SIDE FEED
2. Press the start key. The setting is set.
Completion
Press the stop/clear key. The screen for selecting a maintenance item No. is displayed.
1-4-42
Description
Description
Load paper through the right cover
Load paper through the upper cover