Kyocera KM-6030 Service Manual page 329

2FB/2FC
5. Remove the CIS SHD PWB and flexible flat
cable from CIS.
6. Remove the connector and two screws and
pull out CIS from DP.
Note the position of the graduation of the
retainer.
7. Clean or replace CIS.
8. Connect one end of the flexible flat cable to
the CIS.
1-6-88
Flexible flat cable
Connector
CIS
Figure 1-6-174
Flexible
flat cable
CIS
CIS SHD PWB
Figure 1-6-173
Graduation
CIS
Figure 1-6-175