I NSTALLAT f
Install the stator into the alternator cover.
Apply sealant t o the wire grommet, then install the
wire grommet into the alternator groove securely.
Install and tighten the stator mounting socket bolts t o
the specified torque.
TORQUE: 12 N-m
Install the wire clamp and tighten the bolt t o the spec-
ified torque.
TORQUE: 12 N-m (1.2 kgf-m,
FLYWHEEL REMOVAL
Remove the alternator cover (page 10-2).
Remove the starter idle gear shaft and idle gear.
N
(1.2
kgf-m,
9 Ibf-ft)
9 Ibf-ft)
WIRE CLAMP
\
STATOR
0-3