Flywheel Removal - Honda XL700V Service Manual

ALTERNATOR/STARTER CLUTCH
FLYWHEEL/STARTER CLUTCH

FLYWHEEL REMOVAL

Remove the left crankcase cover (page 11-4).
For alternator
charging coil
Remove the starter reduction gear and shaft.
inspection (page
Remove the starter idle gear and shaft.
17-9).
Remove the flywheel bolt and washer while holding
The flywheel bolt
the flywheel using the special tool.
has left hand
thread.
TOOL:
Flywheel holder
Remove the flywheel using the special tool.
TOOL:
Rotor puller
Remove the washer and needle bearing and woo-
druff key from the crankshaft.
• When woodruff key removal, be careful not to
damage the key groove and crankshaft.
• Do not lose the woodruff key.
11-6
IDLE GEAR
FLYWHEEL HOLDER
07725-0040001 or
equivalent commer-
cially available
BOLT/WAHSER
FLYWHEEL
07733-0020001
WOODRUFF KEY
REDUCTION GEAR
SHAFTS
ROTOR PULLER
WASHER
NEEDLE BEARING