Excitor Coil Inspection - Honda XL200 2001 Shop Manual

XL2 0 0 IGNITION SYSTEM
CONNECTOR
If the measurement is out of specification, disconnect the pulse
generator connector and measure the resistance between the
Blue/Yellow and Ground.
Standard: 293 - 358 Ω (20°C/68°F)
If the resistance still out of specification, replace the stator.
EXCITOR COIL
INSPECTION
NOTE
• It is not necessary to remove the pulse generator from the
engine.
Remove the left side cover.
Disconnect the CDI unit connectors.
Measure the resistance between the Black/Red and Green
terminals.
Standard: 100 - 300 Ω (20°C/68°F)
If the measurement is out of specifications, disconnet the exciter
coil Black/Red connector and measure the resistance between
the Black/Red and body ground.
Standard: 100 - 300 Ω (20°C/68°F)
If the resistance still out of specification, replace the stator.
1 6 -5