Cylinder Removal; Piston Removal; Piston Ring Removal - Honda CRF450L 2019 Owner's Manual & Off-Road Handbook

Piston/Piston Rings/Piston Pin

Cylinder Removal

1. Remove the cylinder (1) while holding the
piston (2).
NOTICE
Do not let the cam chain fall into the crankcase.
Do not pry on or strike the cylinder.
(1)
(1) cylinder (2) piston
2. Remove the dowel pins (3) and cylinder gasket
(4).
NOTICE
Do not let the cam chain fall into the crankcase.
Do not let the dowel pins fall into the crankcase.
(3)
(3) dowel pins (4) cylinder gasket
98
Servicing Your Honda

Piston Removal

1. Place clean shop towels (1) in the crankcase to
keep the piston pin clips, or other parts, from
falling into the crankcase.
2. Remove the piston pin clips (2) using a pair of
needle-nose pliers.
3. Press the piston pin (3) out of the piston (4),
and remove the piston.
Under racing conditions, the piston, rings and
piston pin should be replaced every 8 races or
about every 30.0 hours of running.
NOTICE
Be careful not to damage or shock the piston pin.
Do not clean the piston pin using a commercially
available compound cleaner.
(2)
(1) shop towels
(2) piston pin clips
(4)
(4) (3)
(2)
(2)
(1)
(3) piston pin
(4) piston

Piston Ring Removal

Spread each piston ring (1) and remove by lifting it
up at a point just opposite the gap.
NOTICE
Do not damage the piston ring by spreading the
ends too far.
(1) piston ring
(1)