9B-10 Lighting Systems:
Rear Turn Signal Light Components
1. Rear turn signal light lens
Rear Turn Signal Light Removal and Installation
Removal
1) Remove the frame cover. Refer to "Exterior Parts
Removal and Installation in Section 9D (Page 9D-
11)".
2) Remove the rear combination light.
3) Disconnect the lead wire coupler (1).
(LH: White, RH: Black)
4) Remove the screw (2).
3
2. Rear turn signal light bulb (12 V 21 W)
B837H19206015
2
1
I837H1920035-01
2
5) Remove the side frame cover (3) from the center
frame cover (4). Refer to "Frame Cover Construction
in Section 9D (Page 9D-5)".
6) Remove the rear turn signal light (5).
B837H19206014
1
I837H1920034-02
3. Socket
4
3
I837H1920036-01
5
I837H1920046-01