Originals; Originals That Can Be Faxed - Sharp AR-FX5 Operation Manual

ORIGINALS

ORIGINALS THAT CAN BE FAXED

Original sizes
Using the auto document feeder
Using the document glass
NOTE
Originals that are not a standard size (5-1/2"x8-1/2", 8-1/2"x11", 8-1/2"x11"R, 8-1/2"x14", 11"x17", A5, B5, B5R, A4, A4R, B4,
A3) can also be faxed.
Scanning area of original
Note that the edges of an original cannot be scanned.
Area that cannot be scanned: 0.2" (5mm) or less at top edge and
Automatic reduction of faxed document
If the size (width) of the faxed document is greater than the receiving machine's paper size, the size will be
automatically reduced.
Faxed document width Receiving machine's paper width
11"x17" (A3)
11"x17" (A3)
8-1/2"x14" (B4)
A document can also be faxed without reducing its size. In this case, the left and right edges will not be transmitted.
(Refer to page 8-6.)
1-6
Minimum original size
8-1/2" (width)x5-1/2" (length)
(A5: 210mm (width)x148mm (length))
5-1/2" (width)x8-1/2" (length)
(A5R: 148mm (width)x210mm (length))
0.2" (5mm) or less at bottom edge
: Near edge + far edge = 0.2" (5mm)
or less
8-1/2"x14" (B4)
8-1/2"x11" (A4)
8-1/2"x11" (A4)
Maximum original size
11" (width)x31-1/2"* (length)
(297mm (width)x800mm* (length))
*Long documents can be loaded
11" (width)x17" (length)
(297mm (width)x431.8mm (length))
Far edge
Top edge
Near edge
Area that cannot be scanned
Reduced size
8-1/2"x14" (B4)
8-1/2"x11"R (A4R)
8-1/2"x11"R (A4R)
Bottom edge
Ratio (Area ratio)
1 : 0.64 (1 : 0.78)
1 : 0.5 (1 : 0.5)
1 : 0.78 (1 : 0.64)