Replacing The Paper Exit Roller/A - Konica Minolta FS-107 Service Handbook

FS-107
(4) Install by reversing the removal procedure.
Caution: In case of fixing the tray frame to the fixed
1
fittings, make sure the set screws are fas-
tened so that the tray is horizontal.(Use
the 6 marks at each of the front and rear as
guides for horizontal adjustment.)
1
Rear
REVISED EDITION
1

[3] Replacing the paper exit roller/A

1
Front
DATE
3-2
May 2000
(1) Remove the finisher from the main body.
(2) Take off 5 lids and 6 set screws and remove the
paper conveyance cover.
Lids
Set screws
(3) Take out each of the single springs and set screws
and remove the plate spring roller.
Set screws
Plate spring rollers
Caution: Do not remove the screws for the spring
adjustment plate.
PAGE
3-2
Paper conveyance cover
Spring
adjustment
plate
METHOD
REPLACEMENT