Troubleshooting; Jam Display; Initial Check Items; Misfeed Display - Konica Minolta bizhub C200 Service Manual

Field Service Ver. 1.0 Jun. 2008

Troubleshooting

7.

Jam display

7.1

Initial check items

• When a paper misfeed occurs, first perform the following initial check items.
Check Item
Does the paper meet product specifications?
Is paper curled, wavy, or damp?
Is a foreign object present along the paper path,
or is the paper path deformed or worn?
Are the rolls/rollers dirty, deformed, or worn?
Are the edge guide and trailing edge stop at the
correct position to accommodate the paper?
Are the actuators found operational when
checked for correct operation?
7.2

Misfeed display

• When misfeed occurs, message, misfeed location "Blinking" and paper location "Light-
ing" are displayed on the touch panel of the main body.
Display Code
6601 Turnover section misfeed
6602 Paper feed section misfeed
[1] 6603 Transport section misfeed
6604 Paper exit section misfeed
6605 Image reading section misfeed
7.2.1

Misfeed display resetting procedure

• Open the corresponding door, clear the sheet of paper misfed, and close the door.
Change the paper.
Change the paper.
Instruct the user on the correct paper storage proce-
dures.
Clean or change the paper path.
Clean or change the defective roll/roller.
Set as necessary.
Correct or change the defective actuator.
Misfeed location
Action
[1]
Misfeed processing location
Feed cover
7. Jam display
A0EYF4C500DA
Action
P.44
P.45
P.45
P.46
P.46
43