Field Service Ver. 1.0 Aug. 2006
7.2.6
Consumables counter reset
A. 2nd transfer roller
Function
• Resets the counter for the 2nd transfer roller.
Use
• When the 2nd transfer roller has been replaced with a new one.
Setting
1. Connect the printer to the PC.
/procedure
NOTE
• At this time, make sure that the top cover of the printer is open.
2. Execute the "SecondTransferRoller_for2500W(E).exe" service support tool.
3. Click [Show Status] to check the current counter reading.
4. Click [Yes] to reset the counter.
* To quit the function without resetting the counter, click [No] or [End].
5. Click [Show Status] again to make sure that the counter has been correctly reset.
6. Close the top cover of the printer.
7. Description of the control panel (magicolor 2500W)
A00VF3E503DA
A00VF3E504DA
A00VF3E507DA
A00VF3E504DA
77