Variable Data Inspection Function; Overview; Procedure (Preparing The Csv File To Collate) - Konica Minolta AccurioPress C6100 Operation Manual

8.5

Variable Data Inspection Function

8.5 Variable Data Inspection Function
This function automatically inspects whether or not variable printing of numeric values or barcodes is per-
formed correctly by collating the CSV file of VDP print data with the actual printout in real-time.

Overview

NOTICE
The following optional unit is required to use the Variable Data Inspection function.
Variable Data Inspection Kit UK-312
Tips
-
You can only perform the VDP data comparison without the automatic inspection.
-
The automatic inspection can be combined with the Variable Data Inspection function.

Procedure (Preparing the CSV File to Collate)

1
Check that the collated CSV file is formatted as shown below.
No. Name
1 Setting Quantity
2 JobName
Automatic Inspection Operation Manual
Compare
Printout Import
scan data CSV data
CSV file
①
②
③
④
VDP print data
PDF
CSV
(Variable data + Position data)
Description
Number of setting items related to the entire job.
Select the required items from the following: Job-
Name and Ascending or Descending Order.
To only set "Ascending or Descending Order", type
"1". To set both, type "2".
Job name. Symbol \ is handled as _.
This item can be omitted.
* When this item is omitted, the part (XXX) without
the CSV file name extension (example: XXX.csv) is
recognized as [File Name] of the job.
* If an extension (pdf, etc.) is included in [File Name]
specified in the job side, delete the extension in the
job side, or include the extension in the CSV file
name (example: XXX.pdf.csv).
8
8-17