Table of Contents
Advertisement
Chapter 1 Overview
G Startup sequence of the 7020 series + IP-421 system
As the IP-421 is built in the 7020 series, supplying power to the IP-421 and its initialization starts as
soon as you turn on the copier. The startup sequence is as follows.
1. Turn on the copier.
Supplying power to start the IP-421 starts. Its CPU works to test the system memory
and the system program starts running.
2. The IP-421 performs system check.
3. On completion of system check, the controller is waiting print job.
If printer mode is selected, a message "Ready to print" appears.
G Data processing of the IP-421 (See data flow)
When you attempt to print a document data from a computer connected the IP-421, processing will
be made as follows.
1. The print job comes from the computer (or network) to the parallel port (or Ethernet port if
the KN-303 is used).
2. The CPU, mounted on IP-421, generates the bit map image of one page to another in the
image memory.
3. The bit map image is transferred in the form of video signals from the image memory to the
copier and printed.
1-4 IP-421 PRINT CONTROLLER
Advertisement
Table of Contents
Troubleshooting
