Control Panel - Fuji Xerox ApeosPort-VI C7771 User Manualline

Control Panel

The following describes the names and functions of components on the control panel.
25 24
26
1 <Services Home> button
Press this button to display the Services Home screen.
Reference
You can change the services displayed on the Services Home screen. For more information, refer to "Before Using the Machine" >
"Customizing the Control Panel" > "Customizing the Button Layout" > "Services Home" in the Administrator Guide.
2 Touch screen
Displays messages required for operation, and buttons for various features. You can directly
touch the touch screen to instruct operations and set features.
3 <Log In/Out> button
Lights up when a user is authenticated in the System Administration mode, the
Authentication mode, or the Accounting mode.
Displays the User ID entry screen for entering the System Administration mode, the
Authentication mode, or the Accounting mode.
Press this button to exit these modes.
4 <Job Status> button
Press this button to check or cancel the current job, to check or print stored jobs, or to check
completed jobs.
5 <Machine Status> button
Press this button to check the machine status and meters, to check the status of
consumables, and to print reports.
6 <Power Saver> button
When the machine is not used for a while, it enters the Power Saver mode to reduce power
consumption. When the Power Saver mode is active, the <Power Saver> button lights up.
Press this button to enter or exit the Power Saver mode.
1 2
23 22 21 20 19
3 4 5 6 7
1 2 3
4 5 6
7 8 9
0
＃
C
18 17 16 15 14 13 12
1 2 3
4 5 6
7 8 9
0
＃
C
Control Panel
8
9
10
11
59
2