Wireless Fixed Ip Address Set Up - Barco HDF Use And Installation Manual

Image 13-42
Network, wireless
Press ENTER to open the Wireless menu.
Use the ▲ or ▼ key to select DHCP and press ENTER to toggle between [On] or [Off].
[On] : Wireless DHCP is activated. An automatic IP address is assigned.
[Off] : Wireless DHCP is deactivated. A fixed address must be used.
13.5.9 Wireless fixed IP address set up
Can only be used with a wireless network module installed.
How to set up
Press Menu to activate the menus and select Projector Control → Network → Wireless Setup.
Image 13-44
Main menu, projector control
R5905158 HDF SERIES 16/06/2015
Image 13-43
Wireless, DHCP
Image 13-45
Projector control, network
13. Projector Control
221