GUI – System Settings
Image 10-4: LAN menu
2.
Disable Automatic. Put the switch to the left. The switch becomes gray.
3.
Use the ▲ or ▼ key to select Address and press OK button to activate the input box.
4.
Use the ▲ or ▼ key to change the selected character.
Use the ◄ or ► key to select another character.
Note: Digits can be entered with the digit keys on the remote control or the local keypad. When a digit
is entered in that way, the next character will be selected automatically.
5.
Repeat steps 4 and 5 for the Subnet mask and Default Gateway.
6.
Select APPLY and click OK to confirm all changes.
When the connection is established, it is indicated with the connection symbol and the indication Connected.
10.1.3 Wireless IP address set up
When can the wireless IP address be used?
When the optional WiFi module has been installed on the projector, you can configure the projector in such a
way it can access the network via WiFi instead of a LAN cable.
For more information on how to install the WiFi module, please refer to the installation manual.
How to connect to a wireless network?
1.
In the main menu, select System Settings → Communication → WiFi.
Image 10-5: Communication menu, WiFi
The WiFi menu is displayed.
116
R5911443 /02
UDM