Table of Contents
Advertisement
GUI – System Settings
Image 10–4 Example of the LAN menu
2.
Disable the Automatic slider. The slider becomes gray.
3.
Use the arrow keys to select Address and press OK button to activate the input box.
Image 10–5 Example of entering the IP address
4.
Use the arrow keys and enter key to enter in the IP address.
Note: Digits can be entered with the digit keys on the remote control or the local keypad. When a digit
is entered in that way, the next character will be selected automatically.
5.
Once filled in, select the ✓ symbol and confirm.
6.
Repeat steps 4 and 5 for the Subnet mask and Default Gateway.
7.
Select APPLY and click OK to confirm all changes.
When the connection is established, it is indicated with the connection symbol and the indication
Connected.
10.1.3 Wireless IP address set up
When can the wireless IP address be used?
When the optional WiFi module has been installed on the projector, you can configure the projector in such a
way it can access the network via WiFi instead of a LAN cable.
For more information on how to install the WiFi module, please refer to the installation manual.
How to connect to a wireless network?
1.
In the main menu, select Settings → Communication → WiFi.
122
R5911443 /03
UDM
Advertisement
Table of Contents
