Bottom Cover - Toshiba Tecra 700CS Maintenance Manual

4.14 Bottom Cover

Removing the Bottom Cover
To remove the bottom cover, follow the steps below and refer to Figures 4-30 to 4-33.
1. Turn off the power to the computer, then disconnect the AC adapter and all
external cables connected to the computer.
2. Remove the battery pack, optional memory module, optional PCMCIA card, FDD
or optional CD-ROM drive, HDD, upper cover and keyboard, speakers, keyboard
base and display assembly, infrared board, sound board, IPS board and power
supply board as described in Sections 4.2 through 4.13.
3. Remove four flat M2.5x4 screws securing the metal cover.
4. Lift out the metal cover.
700 Series
Figure 4-30 Removing the metal cover
4-35