Toshiba Tecra 700CS Maintenance Manual page 123

700 series
Hide thumbs Also See for Tecra 700CS:
Table of Contents

Advertisement

(2) Ext. Keyboard Fn key equivalent
(h)
Boot Priority
Use this option to select the disk drive priority for boot up.
You can reverse the order by holding down the F10 key while the
computer is booting. This procedure alternates the setup setting.
(i)
Pointing Devices
This option enables or disables the AccuPoint pointer control stick.
700 Series
Use this option to set a key combination on an external keyboard
to emulate the Fn key on the computer's internal keyboard.
Setting an Fn key equivalent will enable you to use "Hot keys" by
pressing the set combination in place of the Fn key.
Disabled
Fn Equivalent
* If these selections are made, you cannot warm boot the system by
pressing Ctrl + Alt + Del.
FDD → HDD
The computer looks for bootable files first on
the FDD and next on the HDD. (Default)
HDD → FDD
The computer looks for bootable files first on
the HDD and next on the FDD.
Auto selected
If the PS/2 mouse is connected to the computer
when you turn on the power, the PS/2 mouse is
enabled and the AccuPoint is disabled. Other-
wise, the AccuPoint is enabled. (Default)
Simultaneous
Enables both the AccuPoint and PS/2 mouse.
No Fn key equivalent. (Default)
Left Ctrl + Left Alt*
Right Ctrl + Right Alt*
Left Alt + Left Shift
Right Alt + Right Shift
Left Alt + Caps Lock
3-69

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tecra 700ct

Table of Contents