4.19 TFT FL Inverter Board
Removing the TFT FL Inverter Board
To remove the TFT FL inverter board, follow the steps below and refer to Figure 4-40.
1.
Turn off the power to the computer, then disconnect the AC adapter and all
external cables connected to the computer.
2.
Remove the battery pack, optional PCMCIA card, optional memory module and
display mask as described in Sections 4.2, 4.3, 4.4 and 4.17.
3.
Remove one M2.5x6 screw securing the FL inverter board.
4.
Carefully rotate the FL inverter board out from right to left and disconnect the
FL inverter cable from CN1 and the FL cable from CN2.
Figure 4-40 Removing the TFT FL inverter board
700 Series
4-45