3.16 CD-ROM Test
NOTE: Make sure the CD-ROM driver (CDROMDRV.COM) is installed, then insert
the test media CD (Toshiba-EMI Test Disk TDY-03) before executing this test.
To execute the CD-ROM Test, select 13 from the DIAGNOSTIC TEST menu, press Enter
and follow the directions on the screen. The CD-ROM test contains four subtests that test the
computer's CD-ROM functions.
Subtest 01
Sequential Read
This subtest is a sequential reading of one block units (512 bytes) of all logical
addresses.
Subtest 02
Read Specified Address
This subtest reads one-block data from a specified address.
Subtest 03
Random Address/Data
This subtest reads one-block data and multi-block data from random addresses
200 times.
Subtest 04
Playback Music
NOTE: The Toshiba-EMI Test Disk (TDY-03) cannot be used for Subtest
04. For this test, use an ordinary music CD.
This subtest reads track data from a specified track and plays the sound.
700 Series
3-35