Toshiba Tecra 700CS Maintenance Manual page 120

(a) Power-up Modes
This option lets you choose between AutoResume and boot mode. You
can also set this option using hot keys. AutoResume is effective with
either the internal LCD or with an external monitor.
(b) CPU Cache
Use this feature to enable or disable the CPU cache.
When Enabled is selected, a subwindow similar to the one below is
displayed to let you select the cache write policy. The options for this
setting are Write-back (Default) and Write-through.
The write-back policy provides better system performance, because
main memory is accessed only when necessary to update the cache
contents with changes in main memory. The Write-through policy
accesses main memory every time data is handled by the processor.
(c) Auto Power On
This option lets you set a time and date for automatic power on and lets
you enable or disable the ring indicator feature. Ring (Serial Port) is
displayed only when the computer is in Resume mode and the Alarm
Date Option is displayed when Alarm Time is enabled.
Alarm Time is set using hours and minutes. Seconds cannot be changed.
The Alarm Date Option is set using the month and the day. If Alarm
Date is set to Disabled, the computer will be powered on at the same
time every day. Press ↓ to move the cursor to the right and ↑ to move
the cursor to the left when you set the date and time.
3-66
Boot Turns on boot mode. (Default)
Resume Turns on the AutoResume feature.
Enabled Enables the CPU cache. (Default)
Disabled Disables the CPU cache.
OPTION
Write Policy
OPTIONS
Alarm Time
Alarm Date Option
Ring (Serial Port)
= Write-back
= Enable
= Enable
= Enable
700 Series