Log Utilities - Toshiba Tecra 700CS Maintenance Manual

3.21 Log Utilities

3.21.1 Function Description
This function logs error information generated while a test is in progress and stores the
results in RAM. This function can store data on a floppy disk or output the data to a printer.
If the power switch is turned off, the error information will be lost. Error information is
displayed in the following order:
1. Error count (CNT)
2. Test name (TS-NAME)
3. Subtest number (TS-NAME)
4. Pass count (PASS)
5. Error status (STS)
6. FDD/HDD or memory address (ADDR)
7. Write data (WD)
8. Read data (RD)
9. HDC status (HSTS)
10. Error status name ( ERROR STATUS NAME)
3.21.2 Operations
1. Selecting 5 and pressing Enter in the DIAGNOSTIC MENU logs error
information into RAM or onto a floppy disk. The error information is dis-
played in the following format:
XXXXX ERRORS
CNT TS-NAME
001 FDD 02
001 FDD 01
Pass count
Subtest number
Test name
Error count
[[1:Next,2:Prev,3:Exit,4:Clear,5:Print,6:FD Log Read,7:FD Log Write]]
3-46
PASS STS ADDR WD
0000 103 00001 00
0000 180 00001 00
Address
Error status
Write data
RD HSTS [STATUS NAME]
00 FDD - WRITE PROTECTED
00 FDD - TIME OUT ERROR
HDC status
Read data
Error status name
700 Series