Toshiba Tecra 700CS Maintenance Manual page 97

1. All track FORMAT
Pressing 1 selects All track FORMAT, which lets you format the entire disk.
[All track FORMAT]
Drive
Cylinder :
Head
Sector
<<< Model name =
The following selections display at the bottom of the screen in succession:
Drive number select (1:#1,2:#2) ?
(a) Select a drive number and press Enter. The following message will
appear:
Interleave number (1/1 ~ 8) ?
(b) Select an interleave number (1 ~ 8) and press Enter. Pressing only
Enter selects 1.
Unlock format select (1:no/2:yes)
(c) Select whether the disk has an unlock format.
(d) Bad track register
The Bad Track register prompt will appear as shown below:
[ WARNING : Current DISK data will be
Press Bad cylinder number (dddd)] key ?
Press Bad head number (dd)] key ?
Enter the cylinder and head numbers of bad tracks and press Enter.
Note that if there are no bad tracks, pressing Enter alone is the same as
executing the All Track Format described in item (e) below.
Enter the cylinder and head number in decimal notation. Repeat for
each bad track you want to format.
After entering the bad tracks, press Enter to execute the format.
700 Series
: #1 = HDD #2 = Non
XXXX
: XX
: XX
>>>
completely destroyed ]
3-43