Toshiba Tecra 700CS Maintenance Manual page 29

Procedure 3 Connection Check
The power supply wiring diagram is shown below:
Any of the connectors may be disconnected. Perform Check 1.
Check 1 Make sure the AC adapter's cable and AC cord are firmly plugged into the DC IN
15 V socket and wall outlet. If these cables are connected correctly, go to Check
2.
Check 2 Connect a new AC adapter.
If the DC IN icon does not glow green, go to Procedure 5.
If the Battery icon does not glow orange, go to Check 3.
Check 3 Make sure the battery pack is installed in the computer correctly. If the battery is
properly installed and the Battery icon still does not glow orange, go to Procedure
4.
700 Series
2-9