Toshiba Tecra 700CS Maintenance Manual page 217

Appendix G BIOS Rewrite Procedures
This Appendix explains how to rewrite the system BIOS program to update the BIOS on the
700 Series computer.
Tools
To rewrite the BIOS, the following tool is required:
BIOS rewrite disk for the 700 Series computer
Rewriting the BIOS
NOTE: On the 700CT, install an external FDD if the computer has an internal CD-
ROM drive.
1. Set the system to boot mode.
2. Turn off the power to the computer.
3. Remove the external cable and any optional memory or PCMCIA cards.
4. Turn on the power while holding down the F12 key. (Keep holding down the key
until the system speaker sounds a beep.)
5. When the BIOS message is displayed, insert the BIOS rewrite disk into the FDD,
then press the Enter key to start the BIOS rewrite program.
6. When the process is completed, eject the rewrite disk and restart the system.
700 Series
G-1