4.9
Speakers, Keyboard Base, and Display Assembly
Removing the Speakers, Keyboard Base, and Display Assembly
To remove the speakers, keyboard base, and display assembly, follow the steps below and
refer to Figures 4-21 to 4-24.
1.
Turn off the power to the computer, then disconnect the AC adapter and all
external cables connected to the computer.
2.
Remove the battery pack, optional memory module, optional PCMCIA card, FDD
or optional CD-ROM drive, HDD, upper cover, and keyboard as described in
Sections 4.2 through 4.8.
3.
Turn the computer upside down and remove one M2.5x6 silver screw from the
battery pack slot and three M2.5x20 silver screws.
Figure 4-21 Removing the screws from the bottom cover
4.
Turn the computer over and open the display.
700 Series
4-23