Toshiba Tecra 700CS Maintenance Manual page 106

(c) Remove the Diagnostics Disk from the FDD, insert the source disk, and
press any key. The following message will appear, indicating the pro-
gram has started.
[ FDD TYPE ] : TRACK
[ FDD TYPE ] : HEAD
[ FDD TYPE ] : SECTOR = XX
Copy start
(d) Remove the source disk from the FDD, insert a formatted work disk, and
press any key. The [[ track, head = XXX X ]] message will appear and
start copying to the target disk. If the amount of data is too large to be
copied in one operation, the message from step (b) is displayed again.
After the floppy disk has been copied, the following message will
appear:
Copy complete
Another copy (1:Yes/2:No) ?
(e) To copy another disk, type 1 and the message from step (a) will be
displayed again. Entering 2 returns the test program to the DIAGNOS-
TIC MENU.
4. DUMP program
(a) When DUMP is selected, the following message appears:
DIAGNOSTICS-HARD DISK & FLOPPY DISK DUMP : VX.XX
Drive type select (1:FDD, 2:HDD) ?
(b) Select a drive type. If 1 is selected in step (a), the following message
displays:
Select drive number
Select an FDD drive number. The display will go to step (c).
If 2 is selected, the following message displays:
Select drive number
After selecting the HDD, the display will go to step (f).
(c) The following message will be displayed:
Format type select (1:2DD, 2:2D, 3:2HD) ?
3-52
= XXX
= X
[[ track,head =
(1:A, 2:B) ?
(1:C, 2:D) ?
XXX X ]]
700 Series