4.4
Optional PCMCIA Card
Removing an Optional PCMCIA Card
To remove a PCMCIA card, make sure the computer is in boot mode, then follow the steps
below and refer to Figure 4-4.
1.
Turn off the power to the computer, then disconnect the AC adapter and all
external cables connected to the computer.
2.
Remove the battery pack and optional memory module as described in Sections
4.2 and 4.3.
3.
Open the PCMCIA slot cover.
4.
Press the eject button for the upper and/or lower card.
5.
Grasp the PCMCIA card and remove it.
4-10
Figure 4-4 Removing the lower PCMCIA card
700 Series