13.
Open the PCMCIA card cover, remove two M2.5x4 silver screws, and remove
the cover.
14.
Remove six M2.5x6 screws. Note the screw located under the ferrite core and
locations of the ground wires.
NOTE: On units with a keyboard lock, you will find only five M2.5x6 screws
securing the keyboard base.
15.
Remove one M2.5 x 20 silver screw.
16.
Remove two M2x4 silver screws from under the front of the keyboard base.
17.
Lift off the keyboard base and display assembly starting at the back of the
assembly.
Figure 4-23 Removing the screws, keyboard base and display assembly
700 Series
4-25