The following equipment is required to perform some of the Diagnostic test programs:
The Diagnostics Disk (all tests)
A formatted working disk for the floppy disk drive test (all tests)
3.5-inch 2HD/2DD disk for the external 3.5-inch FDD
A cleaning kit to clean the floppy disk drive heads (Head Cleaning)
A PCMCIA wraparound connector for the I/O card test (PCMCIA test)
A printer wraparound connector for the printer wraparound test (Printer test)
An RS-232-C wraparound connector for the RS-232-C port wraparound test (ASYNC
test)
A CD test media
The following sections detail the tests within the Diagnostic Test function of the DIAGNOS-
TIC TEST menu. Refer to Sections 3.17 through 3.24 for detailed information on the
remaining Service Program Module functions.
3-2
700 Series