Toshiba Tecra 700CS Maintenance Manual page 36

Table 2-3 Printer port LED boot mode status (2/2)
Icon status
C0H Password check
A6H Initialization of expansion ROM
FEH Setup boot check
FFH Boot load
Check 1 If any of the following error codes display, go to Procedure 5.
00h, 01h, 02h, 03h, 04h, 05h, 06h, 07h, 08HA, 09A, 0Ah, 0Bh, 0Ch, 0Dh, 18h,
1Fh, 25h, 30h, 40h, 41h, 42h, 4Ah, 55H, 60H, 65h, 70h, 80h, 90h, A6H, A0h,
C0h, FFh
Check 2 If error code 50h displays, go to the Keyboard Troubleshooting procedures in
Section 2.7.
Check 3 If error code 5Ah displays, go to the HDD Troubleshooting Procedures in Section
2.6.
Check 4 If error code 62h displays, go to the FDD Troubleshooting Procedures in Section
2.5.
2-16
Test item Message
—
—
*** Bad xxxx xxxx ***
Check system. Then press [F1] key.
—
700 Series