Toshiba Tecra 700CS Maintenance Manual page 163

5. Turn the assembly over again and remove four M2x4 screws.
Figure 4-35 Removing screws from the system board
6. Separate the system board from the metal cover.
Installing the System Board
To install the system board, follow the steps below and refer to Figures 4-34 and 4-35.
1. Seat the system board in the metal cover.
2. Secure six M2.5x4 screws.
3. Turn the assembly over and secure four M2x4 screws.
4. Turn the assembly over again and connect the fan cable to PJ16.
5. Install the bottom cover, power supply board, IPS board, sound board, infrared
board, keyboard base and display assembly, upper cover and keyboard, HDD,
FDD or optional CD-ROM drive, optional PCMCIA card, optional memory
module, and battery pack as described in Sections 4.14 back through 4.2.
700 Series
4-39