Toshiba Tecra 700CS Maintenance Manual page 172

Installing the LCD Module
To install the LCD module, follow the steps below and refer to Figure 4-41.
1. Connect the LCD flexible cable to CN1 on the LCD module.
2. Seat the LCD module, then secure it to the LCD cover with four M2.5x6 screws.
3. Install the FL inverter board, display mask, optional PCMCIA card, optional
memory module, and battery pack as described in Sections 4.19 (TFT display) or
4.18 (DSTN display), 4.17, 4.4, 4.3 and 4.2.
4-48
700 Series