Toshiba Tecra 700CS Maintenance Manual page 67

Subtest 04 Pointing Stick
This subtest checks the functions of the pointing stick as shown below.
A) IPS stick pressure sensing direction and parameter.
B) IPS switch function check.
This test reports the pointing stick motion response from the IPS and IPS
switch by displaying the location parameters. When the stick is pressed
towards the upper left, the <POINTING> display changes according to the
following illustration. If an IPS switch is pressed, the <BUTTON> display
alternates between black and white. Also, the parameters appear on the right
side of the display. If two IPS switches are pressed at the same time, the
subtest menu is displayed.
*****
< POINTING >
<< PRESS BUTTON1 + BUTTON2 THEN END >>
When a button is pressed, the display alternates as shown below.
700 Series
IPS TEST PROGRAM (V1.00)
< PARAMETER >
STATUS:0008h
X-RATE:0000h
Y-RATE:0000h
(1)
<
*****
< BUTTON >
(2)
There are eight directions of arrow
marks as shown below.
^
>
3-13