Accessing The Setup Program - Toshiba Tecra 700CS Maintenance Manual

3.25.2

Accessing the SETUP Program

Selecting 0 from the DIAGNOSTICS MENU and pressing Enter displays the Setup screen,
as illustrated below:
MEMORY
Total
DISPLAY
Display Adapter
LCD Display Mode
Power On Display
Text Mode Stretch
VGA Segment Address = E000H
PASSWORD
Not Registered
HARD DISK
HDD Mode = Enhanced IDE (Normal)
PCI BUS
PCI BUS = IRQ11
↑ ↓ ← → :
Esc: Exit without saving, Home: Set default values, End: Save changes and Exit
NOTES: 1. The Panel Power On/Off item appears only when the computer is in
Resume mode.
2. The DSTN LCD Display Colors options are 222k and 4096 colors.
3.25.3 Moving Within the SETUP Menu and Changing Values
1. Press ← and → to move between the two columns. Press ↑ and ↓ to move
between items in a column.
2. Press either the space bar or BkSp to change the value.
3.25.4 Accepting Changes and Exiting the SETUP Window
1. Press End to accept the changes you made.
If the changed item does not require the system to reboot, the following
message is displayed:
Are you sure? (Y/N)
3-56
SYSTEM SETUP
= 8192 KB
= VGA compatible
= 256K Colors
= Internal/External
= Enabled
Select items, Space, BkSp : Change values
BIOS version = x.xx
I/O PORTS
Serial Port = COM1(3F8H/IRQ4)
Infrared Port = Not Used
Parallel Port = LPT1(378H/IRQ7/CH3)
Sound System = (0220H/IRQ10/CH1)
BATTERY
Battery Save Mode = Full Power
OTHERS
Power-up Mode
CPU Cache
Auto Power On
Alarm Volume
System Beep
Panel Power On/Off
Keyboard
Boot Priority
Pointing Devices
= Resume
= Enabled
= Disabled
= High
= Enabled
= Disabled
= Layout/Fn
→
= FDD HDD
= Auto-selected
700 Series