Toshiba Tecra 700CS Maintenance Manual page 145

4.8 Upper Cover and Keyboard
Removing the Upper Cover and Keyboard
To remove the upper cover and keyboard, follow the steps below and refer to Figures 4-18 to
4-20.
1. Turn off the power to the computer, then disconnect the AC adapter and all
external cables connected to the computer.
2. Remove the battery pack, optional memory module, optional PCMCIA card, FDD
or optional CD-ROM drive, and HDD as described in Sections 4.2 through 4.7.
3. Remove three silver M2.5x4 screws from the back of the computer.
Figure 4-18 Removing screws from the back of the computer
4. Open the display panel and lay the display back fully.
5. Unlatch the latches: one on the left, two in front and three in back and remove the
upper cover.
700 Series
Figure 4-19 Removing the upper cover
4-21