Installing an Optional PCMCIA Card
To install a PCMCIA card, follow the steps below and refer to Figure 4-5.
NOTE: Before you install the PCMCIA card, make sure the computer is in boot mode.
1.
Turn off the power to the computer, then disconnect the AC adapter and all
external cables connected to the computer.
2.
Insert the PCMCIA card. Press gently to ensure a firm connection.
3.
Close the PCMCIA slot cover.
4.
Install the optional memory module and battery pack as described in Sections 4.3
and 4.2.
700 Series
Figure 4-5 Installing the lower PCMCIA card
4-11