4.9
Bottom Cover
Removing the Bottom Cover
To remove the T6600C's bottom cover, follow the steps below and refer to Figures 4-17 and
4-18.
1.
Turn off the power to the computer, then disconnect the power cord and all
external cables connected to the computer.
2.
Remove the optional PCMCIA card, optional memory card(s), keyboard unit,
optional turbo cache memory module, back cover, and optional expansion card as
described in Sections 4.2 through 4.5, 4.7, and 4.8.
NOTE: If you are going to be removing the system board, proceed to Step 3.
If you are going to be removing the 5.25-inch bay, HDD, or back panel board,
proceed to Step 4.
3.
Remove the two power supply cables from PJ440 and PJ441 and the internal
FDD cable from PJ290 (Figure 4-17).
Figure 4-17 Removing the Power Supply and FDD Cables
T6600C, T6600C/CD, T6600C/CDV
4-19