Toshiba Tecra 700CS Maintenance Manual page 154

Installing the Sound Board
To install the sound board, follow the steps below and refer to Figure 4-26.
1. Position the mouse and keyboard ports on the sound board through their
corresponding holes in the metal bracket on the system board, then seat the sound
board.
2. Press to connect connectors PJ1 and PJ2.
3. Secure one M2.5x4 screw.
4. Install the infrared board, speakers, keyboard base and display assembly, upper
cover and keyboard, HDD, FDD or optional CD-ROM drive, optional PCMCIA
card, optional memory module, and battery pack as described in Sections 4.10
back through 4.2.
4-30
700 Series