Installing the TFT FL
To install the TFT FL, follow the steps below and refer to Figure 4-46.
1.
Place the FL in the frame. Lift up the plastic film to route the FL cable.
2.
Seat the metal FL cover.
3.
Secure the six latches.
4.
Secure two M2x6 silver screws.
5.
Install the LCD module, FL inverter board, display mask, optional PCMCIA card,
optional memory module, and the battery pack as described in Sections 4.20, 4.19,
4.17, 4.4, 4.3 and 4.2.
4-54
700 Series