4.6
Optional CD-ROM Drive
Removing an Optional CD-ROM Drive
To remove a CD-ROM drive, follow the steps below and refer to Figures 4-11 to 4-13.
1.
Turn off the power to the computer, then disconnect the AC adapter and all
external cables connected to the computer.
2.
Remove the battery pack, optional memory module, and optional PCMCIA card as
described in Sections 4.2, 4.3, and 4.4.
3.
Turn the computer upside down.
4.
Slide the LED indicator cover to the left to free it from the latches.
5.
Rotate the cover up.
6.
Pull the release handle to pop the drive out slightly.
7.
Grasp the drive and pull it out.
4-16
Figure 4-11 Removing the CD-ROM drive
700 Series