Feed Roller Cleaning - Ricoh J012 Service Manual

3.10.3 FEED ROLLER CLEANING

Preparation:
Remove platen or ADF. (
Raise the scanner unit to full upright. (
Remove: (1) paper cassette, (2) paper output tray (
1. Remove the flushing unit [1] ( x1).
2. Use the tip of a long flat-head screwdriver to release the Teflon lock tab [2] of the
transport roller.
3. Push the transport roller gear [3] to the left. This unlocks the roller and allows it to rotate
freely.
4. Rotate the roller and clean it with a dry cloth.
Be sure to lock the roller in place after cleaning.
SM
CÓPIA NÃO CONTROLADA
3.2.4, 3.2.5)
3.2.7)
3-63
CÓPIA NÃO CONTROLADA
Cleaning Procedures
3.2.8)
J012/J013/J014