Table of Contents
Advertisement
3.
On the left side of the machine use the tip of a small flat-head screw driver to press the
leaf spring [1] in toward the center of the machine to release the tension on the strip,
then disconnect the end of the strip from the spring.
4.
On the right side of the machine, disconnect the other end of the film strip [2].
5.
Remove the strip from the machine.
Reinstallation
When you reinstall the horizontal encoder film:
First, on the right side of the machine attach the end of the strip with its beveled corner
down as shown above.
Next, attach the other end to the leaf spring on the left side of the machine.
The machine will malfunction if the horizontal encode strip is installed incorrectly.
SM
CÓPIA NÃO CONTROLADA
3-37
CÓPIA NÃO CONTROLADA
Encoders
J012/J013/J014
Hide quick links:
Advertisement
Table of Contents
