Table of Contents
Advertisement
SC Error Codes
Jam 11
Duplex Paper Jam Between TE Sensor and Registration Sensors
Message: Paper Misfeed: Inverter Guide Plate
A paper late jam occurred while printing the 2nd side of a duplex print or
inverting paper. The trailing edge sensor detected the leading and trailing
Jam
edge of the paper but the registration sensors failed to detect the paper
because it stopped. (The registration sensor did, however, detect the
leading edge of the inverted paper from the duplex unit.)
Cause:
The registration sensors failed to signal detection of the paper.
Trailing edge sensor
1st Registration sensor
Problem Site
2nd Registration sensor
CTL board
Perform check, take action in this order:
1.
Replace the inverter guide plate.
Action
2.
Replace the trailing edge sensor.
3.
Replace 1st, 2nd Registration sensors.
4.
Replace the CTL board.
J012/J013/J014
CÓPIA NÃO CONTROLADA
4-34
CÓPIA NÃO CONTROLADA
SM
Hide quick links:
Advertisement
Table of Contents
