Ricoh J012 Service Manual page 282

SP Mode Service Tables
1010 REG:MAN:OHP:F
Use this SP code to adjust writing in the main scan direction for transparencies
(OHP) loaded in the bypass tray. Do this setting when registration does not
match the image start position on the user image adjustment menu.
[-128 to +127/FA/1/0.1 mm]
1011 REG:FD2:NORM:F
Use this SP code to adjust writing in the sub scan registration for normal paper.
Do this setting when it is necessary to fine adjust the line feed position.
[-128 to +127/FA/1/0.1 mm]
1012 REG:FD2:GLOS:F
For Future Use. Use this SP code to adjust writing in the sub scan registration
for glossy paper. Do this setting when it is necessary to fine adjust the line feed
position.
[-128 to +127/FA/1/0.1 mm]
1013 REG:FD2:OHP:F
For Future Use. Use this SP code to adjust writing in the sub scan direction for
transparencies (OHP). Do this setting when it is necessary to fine adjust the
line feed position.
[-128 to +127/FA/1/0.1 mm]
J012/J013/J014
CÓPIA NÃO CONTROLADA
Adjust Main Scan Registration (Bypass: OHP: FA)
Adjust Sub Scan Registration (Normal Paper: 2nd
Registration: FA)
Adjust Sub Scan Registration (Glossy Paper: 2nd
Registration: FA)
Adjust Sub Scan Registration (OHP: 2nd Registration:
FA)
5-48
CÓPIA NÃO CONTROLADA
SM